User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
542
ID Card Settings
If ID card authentication is enabled, select the authentication type.
NOTE
This functions appears when the Card Authentication kit is activated.
➡ Card Authentication Kit(B) AC <IC card authentication kit (Activate)> (page 738)
Keyboard Login
When ID card authentication is enabled, select whether or not login by keyboard is allowed.
1
Display the screen.
1 [System Menu / Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select [Keyboard Login] from "ID Card Settings".
2
Configure the settings.
1 Select [Prohibit] or [Permit].
Additional Authentication
Select whether or not to require password entry after authenticating by ID card.
NOTE
This function is not displayed when "Server Type" from "Network Authentication" is set to [NTLM] or [Kerberos].
1
Display the screen
1 [System Menu / Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select [Additional Authentication] from "ID Card Settings".
To Next Page
Loading...
