System Menu > Notification/Report
440
Result Report Setting
[System Menu / Counter] key > [Notification/Report] > "Result Report Setting"
[Send Result Report]
Automatically print a report of transmission result when a transmission is complete.
*1 This item is displayed for fax-compatible machines.
*2 Not displayed if both "Email/Folder" and "Fax" are [Off].
[RX Result]
This item is displayed for fax-compatible machines.
For details, refer to the following:
➡ FAX Operation Guide
[Job Finish Notice Setting]
This item is displayed for fax-compatible machines.
For details, refer to the following:
➡ FAX Operation Guide
Item Description
[Email/Folder] Automatically print a report of transmission result when Email or
SMB/FTP transmission is complete.
Value: [Off], [On], [Error Only]
[Fax]
*1
➡ FAX Operation Guide
[Canceled before Sending]
*2
Print a send result report if the job is canceled before being sent.
Value: Off, On
[Recipient Format]
*2
Select the Recipient Format for the send result report.
Value: [Name or Destination], [Name and Destination]
To Next Page
Loading...
