System Menu > DeviceSettings
435
Error Handling
[System Menu / Counter] key > [DeviceSettings] > [Error Handling]
Item Description
[Duplexing Error] Set what to do when duplex printing is not possible for the selected
paper sizes and media types.
Value
[1-sided]: Printed in 1-sided.
[Display Error]: Message to cancel printing is displayed.
[Paper Mismatch Error] Set what to do when the selected paper size or type does not match
paper size or type loaded in the specified paper source while printing
from the computer by specifying the cassette or multipurpose tray.
Value
[Ignore]: The setting is ignored and the job is printed.
[Display Error]: Message to cancel printing is displayed.
[Wrong Size Paper Loaded] Set what to do when it is detected that the multipurpose tray paper size
setting does not match the actual paper size that is fed.
Value
[Ignore]: The setting is ignored and the job is printed.
[Display Error]: Message to cancel printing is displayed.
[Auto Error Clear] If an error occurs during processing, processing stops to wait for the
next step to be taken by the user. In the Auto Error Clear mode,
automatically clear the error after a set amount of time elapses.
Value: On, Off
NOTE
If you select On for Auto Error Clear, set the amount of time to wait before
automatically clearing errors. The setting range is 5 to 495 seconds (in 5
second increments).
[Continue or Cancel Error Job] Set which users can cancel or continue operations for jobs which were
paused due to an error.
Value: [All Users], [Job Owner Only]
NOTE
Administrator can cancel all jobs regardless of this setting.
To Next Page
Loading...
