System Menu > Adjustment/Maintenance
509
[Sharpness Adjustment]
Adjusts the sharpness of image outlines.
[Contrast]
Make the overall contrast higher or lower.
[Toner SaveLevel (EcoPrint)]
[Auto Color Correction]
This setting allows you to adjust the detection level used by the machine to determine whether the original is color
or black and white in Auto Color Selection Mode. Setting a lower value will result in more originals being identified
as color, while a larger value will tend to increase the number of originals being identified as black and white.
Value: 1 (color), 2,3,4,5 (black and white)
[Correcting Black Line]
Correct fine lines (streaks caused by contamination), which may appear on the image, when the document
processor is used.
Value: [Off], [On]
[Color Registration - Auto]
When first installing the machine or moving it to a new location, color drift during printing may occur. Use this
function to correct the color position of each of cyan, magenta and yellow to resolve color drift.
Item Description
[Copy] Sharpen or blur overall image outlines during copying. Adjustment can
be made in 7 levels.
Value: -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
[Send/Box] Sharpen or blur overall image outlines when sending or storing them in
the Document Box. Adjustment can be made in 7 levels.
Value: -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
Item Description
[Copy] Increases or decreases the overall contrast of copies.
Value: -3 (Lower), -2, -1, 0 (normal), +1, +2, +3 (Higher)
[Send/Box] Increases or decreases the overall contrast when documents are sent or
saved in a document box.
Value: -3 (Lower), -2, -1, 0 (normal), +1, +2, +3 (Higher)
Item Description
[Copy] Select the default Toner Save Level (EcoPrint).
Value: 1 to 5
Raising the level reduces toner consumption, but image quality falls.
[Printer] Select the default Toner Save Level (EcoPrint).
Value: 1 to 5
Raising the level reduces toner consumption, but image quality falls.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
