7-24
Setup and Registration (System Menu) > System Menu
Auto Error Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On
Error Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
This function is displayed when [Auto Err. Clear] is set to [On].
FormFeed TimeOut Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed. When the
preset timeout passes, the machine automatically prints paper. The options are between 5 and
495 seconds.
Value: 5 to 495 seconds (in 5 second increments)
WeeklyTimer Set. Configure settings for switching the machine to OFF and waking it automatically at a specified
time for each day of the week.
Value: Off, On
Retries
*1
Set whether or not retry of machine power-off is performed.
Value: Limited, Unlimited
Retry Times
*2
Set the number of retries for turning OFF this machine.
Value: 0 to 10 times
Retry Interval
*2
Set the retry interval.
Value: 10 to 60 seconds (increments of 1 seconds)
Pwr On Time (###.)
*1
Set whether or not the machine power will turn on at a time specified for each day of the week.
Value: Disable, Enable
Power On Time For each day of the week, specify the time at which the machine power will turn on.
Value: Hour (00 to 23), Minute (00 to 59)
Pwr Off Time (###.)
*1
Set whether or not the machine power will turn off at a time specified for each day of the week.
Value: Disable, Enable
Power Off Time For each day of the week, specify the time at which the machine power will turn off.
Value: Hour (00 to 23), Minute (00 to 59)
*1 This function is displayed when [WeeklyTimer Set.] is set to [On].
*2 This function is displayed when [Retries] is set to [Limited].
Item Description