Copying Functions
OPERATION GUIDE 4-19
4
Print Override
This function allows you to suspend the current print job when you need to make copies immediately. When the
interrupt copy job is completed, the machine resumes the suspended print job.
NOTE: If the machine is left for 60 seconds in the interruption copy mode, the interrupt copy job is
automatically canceled and the print job resumed.
1 Press the Function Menu key. Function Menu
appears.
2 Press the U or V key to select [Print Override].
3 Press the OK key. Print Override appears.
4 Press the U or V key to select [On].
5 Press the OK key. Completed. is displayed, the
machine is put into the interruption copy mode, and
the basic screen appears.
6 Perform the interrupt copy job in the same fashion
as a normal copy job. When the interrupt copy job
is completed, the machine resumes the suspended
print job.
Function Menu:
a
b
*********************
2
Collate
T
3
Duplex
T
[ Exit ]
1
Paper Selection
g
Print Override:
a
b
*********************
2
On
1
*Off
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
