Kyocera FS-1128MFP - Saving Documents to USB Memory (Scan to USB)

Document Box
6-4 OPERATION GUIDE
Saving Documents to USB Memory (Scan to USB)
This function allows you to store scanned image files in USB memory connected to the machine. You can store
files in PDF, TIFF, JPEG or XPS format.
NOTE: The maximum number of the storable files is 100.
Storing Documents
The procedure for storing documents in removable USB memory is explained below.
1 Plug the USB memory into the USB memory slot .
2 Press the Document Box key. The Document Box
menu appears.
3 Press the U or V key to select [USB Memory].
4 Press the OK key. USB Memory appears.
5 Press the U or V key to select [Store File].
6 Press the OK key. The basic screen appears.
Change the original type, file format, etc., as
necessary. For changing scan settings, refer to
Sending Functions on page 5-1.
7 Press the Start key. The original is scanned and the
data is stored in the USB memory.
Document Box: a b
*********************
1 USB Memory
USB Memory:
a b
*********************
i Folder-1
j File-1 T
[ Menu ] [ Select ]
N Store File
Ready to scan.
A4
q
[][ ]
Downloaded From ManualsPrinter.com Manuals