Default Setting (System Menu)
8-92 OPERATION GUIDE
Date/Timer
Date/Timer settings include:
• Date/Time …8-92
• Date Format …8-95
• Time Zone …8-97
• Summer Time …8-99
• Auto Error Clear …8-101
• Auto Sleep …8-103
• Auto Panel Reset …8-106
• Low Power Timer …8-108
• Unusable Time …8-109
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and
time set here will be displayed on the header.
CAUTION: Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Date Setting], and
press the OK key.
Sys. Menu/Count.:
a
b
4
User/Job Account
5
User Property
*********************
[ Exit ]
6
Common Settings
Common Settings:
a
b
*********************
2
Default Screen
3
Sound
[ Exit ]
1
Language
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
