Kyocera FS-1128MFP - Ipv6 Setting

Preparation before Use
2-14 OPERATION GUIDE
9 Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
10 Press the U or V key to select [IPv4 Setting].
11 Press the OK key. The IPv4 Setting menu appears.
12 Press the U or V key to select [DHCP].
13 Press the OK key. DHCP appears.
14 Press the U or V key to select [Off] and then press
the OK key.
Completed. is displayed and the screen returns to
the IPv4 Setting menu.
15 Press the U or V key to select [Bonjour].
16 Press the OK key. Bonjour appears.
TCP/IP Settings: a b
1 TCP/IP
*********************
3 IPv6 Setting
[ Exit ]
2 IPv4 Setting
IPv4 Setting:
a b
*********************
2 Bonjour
3 IP Address
[ Exit ]
1 DHCP
DHCP:
a b
1 Off
*********************
2 *On
IPv4 Setting:
a b
1 DHCP
*********************
3 IP Address
[ Exit ]
2 Bonjour
Bonjour:
a b
*********************
2 On
1 *Off
Downloaded From ManualsPrinter.com Manuals