Kyocera FS-1128MFP - Default Gateway

Preparation before Use
OPERATION GUIDE 2-15
2
17 Press the U or V key to select [Off] and then press
the OK key.
Completed. is displayed and the screen returns to
the IPv4 Setting menu.
18 Press the U or V key to select [IP Address].
19 Press the OK key. IP Address appears.
20 Use the arrow keys to enter the IP address.
Press the Y or Z key to move the cursor position
horizontally.
Press the U or V key or the numeric keys to enter
the IP Address. Each 3 digits can be set between
000 and 255.
IMPORTANT: When the DHCP Setting (page 2-18) is
[On], the current IP address is displayed and cannot be
changed.
When setting an IP address, set the DHCP Setting
(page 2-18) to Off.
21 Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
22 Press the U or V key to select [Subnet Mask].
IPv4 Setting: a b
1 DHCP
2 Bonjour
*********************
[ Exit ]
3 IP Address
IP Address:
a b
123.145.167.
189
IP Address: b
123.145.167.189
IPv4 Setting: a b
3 IP Address
*********************
5 Default Gateway
[ Exit ]
4 Subnet Mask
Downloaded From ManualsPrinter.com Manuals