Default Setting (System Menu)
8-48 OPERATION GUIDE
8 Press the OK key. Border Line appears.
9 Press the U or V key to select [ None], [l Solid
Line], [m Dotted Line] or [n Positioning Mark].
10
Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
Orig. Binding
Select the default value for the binding edge of the original when [2-sided>>1-sided] or [2-sided>>2-sided] is
selected for Duplex. Items available for the default value are as follows:
NOTE: This setting is shown only when the optional document processor (DP-110) is installed.
Use the procedure below to select the default value for the binding edge of the original.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
Border Line:
a
b
*********************
2
l
Solid Line
3
m
Dotted Line
1
* None
Item Description
o Left/Right Left/right binding
p Top Top binding
Sys. Menu/Count.:
a
b
4
User/Job Account
5
User Property
*********************
[ Exit ]
6
Common Settings
Common Settings:
a
b
*********************
2
Default Screen
3
Sound
[ Exit ]
1
Language
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
