Default Setting (System Menu)
OPERATION GUIDE 8-149
8
Optional interface (Optional interface card setting)
This locks and protects the optional interface slots (OPT1). The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System].
2 Press the OK key. The System menu appears.
3 Press the U or V key to select [I/F Block Set.].
4 Press the OK key. The I/F Block Set. menu
appears.
5 Press the U or V key to select [Option I/F].
6 Press the OK key. Option I/F appears.
7 Press the U or V key to select [Unblock] or [Block].
8 Press the OK key. Completed. is displayed and the
screen returns to the System menu.
Sys. Menu/Count.:
a
b
1
Report
2
Counter
*********************
[ Exit ]
3
System
System:
a
b
1
Network Setting
*********************
3
Security Level
[ Exit ]
2
I/F Block Set.
I/F Block Set.:
a
b
1
USB Host
2
USB Device
*********************
[ Exit ]
3
Option I/F
Option I/F:
a
b
*********************
2
Block
1
*Unblock
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
