2H5/2HS
1-3-6
Printing an event log
(EVENT LOG)
Description
Prints a history list of occurrences of paper jam, self-diagnostics, toner replacements, etc.
Purpose
To allow machine malfunction analysis based on the frequency of paper misfeeds, self diag-
nostic errors and replacements.
Procedure
1. Connect the USB cable between printer and PC.
Figure 1-3-3
2. Connect the power cord.
3. Turn printer power on. Make sure the printer is ready.
4. At the DOS prompt, send the following command to the printer:
echo !R! ELOG;EXIT;>prn
Event log will be printed.
Service items Description
To PC
USB cable
USB interface
connector
To Next Page
Loading...
