KIR Level
2-58
KIR Level
This printer incorporates the KIR (Kyocera Image Refinement) smoothing function. KIR provides
high quality printing by providing a software-type improvement to the resolution. Print a status page to
find out the current mode.
Note_____________________________________________________________________________
• Set the print density to “ 03 ” when setting the KIR mode. For details on print density, see
page 2-62.
• You can look at the check line, the last line on a status page, to make the optimum KIR mode
setting. Please refer to the table on the next page.
The KIR setting is Off. The KIR setting is On
(Default setting).
To Next Page
Loading...
