Operating Procedures
2-12
Switching Power On
Check that the power cord is securely plugged in at both ends. Check that the printer is connected to
the computer (See page 1-28).
1. Push the power switch to the ON ( | ) position.
2.
Wait for the printer to warm up. During warm-up the message display indicates Self test.
3.
At the end of the warm-up period, the ON LINE indicator lights, and the message display
indicates Ready.
The printer is now ready to print.
Note _____________________________________________________________________
If an error is detected while the printer is warming up, the ATTENTION indicator will light. A message
concerning the error will be displayed in the message display. (See Chapter 4.)
Power Switch
To Next Page
