Kyocera FS-7000+ - Connect the Printer to the Computer

Chapter 1 Installing the Page Printer
1- 25
9. Connect the printer to the computer.
CAUTION
Before performing this step, be sure to turn off the printer's power switch and unplug the
power plug from the power outlet. Failure to do so may result in electric shock.
A standard Centronics parallel interface connector ( ) and RS-232C/RS-422A serial interface
connector (IOIOI) are located on the rear side of the printer. For pin connections, please refer to
Appendix C.
Parallel Interface Connector (
)
Serial Interface (RS-232C/RS-422A)
Connector (IOIOI)