Appendix B Paper Selection
B-3
Paper Specifications
The following table summarizes the basic paper specifications. Details are given on the following
pages.
Paper Specifications
Weight 60 to 90 g/m
2
(16 to 24 lbs./ream)
Thickness 0.086 to 0.110 mm (3.4 to 4.3 mils)
Dimensional accuracy ±0.7 mm (±0.0276 inches)
Squareness of corners 90° ±0.2°
Moisture content 4% to 6%
Pulp content 80% or more
Note _____________________________________________________________________
Consult with your Kyocera dealer before purchasing any specially treated paper or special application
paper.
Kyocera bears absolutely no responsibility for accidents resulting from the use of inappropriate paper
which does not meet the specifications listed above. For paper, contact the licensed dealer of
Kyocera from which you purchased the printer.
To Next Page
Loading...
