Kyocera FS-7000+ - Open the Paper Stopper on the Face-Down Tray (if Required); Open the Face-Up Output Tray (When the Tray Is Being Used)

Setup and Connections
1- 24
7. Open the paper stopper on the face-down tray (if required).
Raise the paper stopper on the face-down tray.
8. Open the face-up output tray (when the tray is being used).
Use the face-up output tray when you wish paper to be stacked with the printed side facing up
(reverse order). The face-up output tray is located on the left side of the printer. Use it by opening as
shown in the figure.
Paper Stopper
Face-up output tray