Operating Procedures
2-14
Selecting the Output Tray
Printed paper can be output on either the face-up output tray or the face-down output tray. Selecting
the face-up output tray will cause paper to be stacked with the printed surface facing up. Selecting the
face-down output tray will cause paper to be stacked with the printed surface facing down. Normally it
is more convenient to use the face-down output tray.
When the message Ready or Add paper appears in the message display, the output tray will be
switched every time the STACK key is pressed and the selected destination will appear in the
message display as follows.
Face-up tray
Face-down tray
The output tray currently selected will also flash on the indicator on the front panel.
Face-Down Tray Indicator
Face-Up Tray Indicator
To Next Page
Loading...
