Print Quality Problems
5-6
Printed Results Corrective Action
The image is smeared. Clean the charger wire
Open the printer's front cover and clean the charger wire
using the green cleaning knob. (See Chapter 4.)
Faint or blurred printing Check the Ecoprint setting. (See Chapter 2.)
Try setting toner control to high density.
(See Chapter 2.)
If the Toner low TK-30 message is displayed and the
toner indicator is flashing, install a new toner kit.
(See Chapter 4.)
Clean the charger wire
Open the printer's front cover and clean the charger wire
using the green cleaning knob. (See Chapter 4.)
Grey background. Check the control panel.
If the Toner low TK-30 message is displayed and the
indicator is flashing, install a new toner kit. (See Chapter 4.)
(Continued on next page)
To Next Page
Loading...
