Kyocera FS-C2026MFP+ - Service Mode; Executing a Service Mode

2MA/2MB
1-3-57
1-3-2 Service mode
The machine is equipped with a maintenance function which can be used to maintain and service the
machine.
(1) Executing a service mode
Press the System Menu/Counter key.
Select [Adjust/Maint.] using the cursor
up/down keys and press the start key.
The selected service mode is run.
Press the stop key.
Select [Service Setting] using the cursor
up/down keys and press the start key.
Start
End
The Sys. Menu/Count. menu appears.
The Adjust/Maint. menu appears.
The Service Setting menu appears.