Printing Operation
2-12
3D View
This shows the status of the monitored printer as a 3D image. You can
choose whether to show or hide the 3D view from the menu displayed
when you right-click the Status Monitor icon.
If an information notification event occurs, the 3D view and an alert sound
are used to notify you. For information on the sound notification settings,
refer to Status Monitor Settings on page 2-13.
Status Monitor icon
While the Status Monitor is running, its icon is displayed in the taskbar
notification area. When you position the cursor over the icon, the printer
name appears. Right-clicking the Status Monitor icon allows you to set
the options below.
Show the status monitor (Hide the status monitor)
Displays or hides the Status Monitor icon.
Configure...
If the printer is connected to a TCP/IP network and has its own IP
address, use a web browser to access the COMMAND CENTER to
modify or confirm the network settings. For more information, refer to the
COMMAND CENTER Operation Guide.
Preferences...
Specify the Sound Notification and Appearance settings for the Status
Monitor. For details, refer to Status Monitor Settings on page 2-13.
www.kyoceramita.com
Accesses the Kyocera Mita website.
Exit
Exits the Status Monitor.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
