To Next Page
T
Travis GutierrezSep 4, 2025
How to resolve 'Close document processor' message on Kyocera Copier?
- JJoseph BurnettSep 4, 2025
If the Kyocera Copier displays 'Close document processor', ensure that the Document Processor is completely closed.
How to resolve 'Close document processor' message on Kyocera Copier?
If the Kyocera Copier displays 'Close document processor', ensure that the Document Processor is completely closed.
What to do if Kyocera Copier says 'MP tray empty. Add paper'?
If the Kyocera Copier indicates 'MP tray empty. Add paper,' place paper in the MP Tray. If the paper still fails to feed, try resetting the paper in the tray.
How to resolve 'Add paper in cassette #' message on Kyocera Copier?
If your Kyocera Copier displays 'Add paper in cassette #', load paper into the cassette indicated by the # symbol on the display.
Why is the 'Add Toner' indicator blinking on my Kyocera Copier?
If the 'Add Toner' indicator on your Kyocera Copier is blinking, it means the toner is low. Replace the toner container with a new one as soon as possible.
How to exit Sleep Mode on Kyocera Copier?
To exit Sleep Mode on the Kyocera Copier, press the [Energy saver] button.
What to do if Kyocera Copier paper misfeeds frequently?
To address paper misfeeds on your Kyocera Copier: * Ensure the paper is set correctly. * If copies are curling, remove the paper, turn it over, and replace it. * Replace the paper with new paper. * Remove any jammed paper. * Match the paper size of the paper set in the MP Tray and the MP Tray Size setting.
Why is my Kyocera Copier making dark copies?
If the Kyocera Copier produces dark copies, perform the “Auto Exposure Adjustment” or use Exposure Adjustment to set the proper exposure. You can also perform the Manual Exposure Adjustment in each original mode.
What to do if Kyocera Copier displays 'Memory is full. Cannot continue'?
If the Kyocera Copier shows 'Memory is full. Cannot continue,' press [Stop/Clear], then press [Interrupt] again after the data is deleted to exit Interrupt Copying. Once the interrupted copy is complete, repeat the procedure.
What to do if Kyocera Copier says 'Close document processor cover'?
If the Kyocera Copier displays 'Close document processor cover', close the left cover and then the front cover.
What to do if my Kyocera Copier says 'Memory is full. Press OK'?
If your Kyocera Copier displays 'Memory is full. Press OK,' press [OK] to start printing the copies. Alternatively, press [Reset] or [Stop/Clear] to delete the data. Try reducing the number of originals and repeat the copying procedure.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Technology | Laser |
| Print Speed | 16 ppm |
| Max Print Resolution | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Max Copy Resolution | 600 x 600 dpi |
| Scan Type | Flatbed |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Max Paper Size | A3 |
| Duplex Printing | Manual |
| Interface | USB 2.0 |
| Memory | 32 MB |
| Supported Operating Systems | Windows, Mac OS |
| Type | All-in-One Printer |
| Zoom Range | 50% - 200% |
