Kyocera KM-1635 - Interrupt Copying

2HA/2HB
1-3-15
U051
Adjusting the amount of slack in the paper
Description
Adjusts the amount of slack in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Adjustment
1. Press the start key.
2. Select the item using the exposure adjustment keys.
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the zoom +/- keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the amount of slack; the smaller the value, the smaller the amount of
slack.
Figure 1-3-4
6. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
Exposure
indicator
Description Setting
range
Initial
setting
Change in
value per step
Exp. 1 (lit) Paper feed from drawer -50 to 127 20 0.32 mm
Exp. 2 (lit) Paper feed from MP tray -50 to 127 0 0.32 mm
Exp. 3 (lit) Paper feed from optional first
paper feeder
-50 to 127 0 0.32 mm
Exp. 4 (lit) Paper feed from optional second
paper feeder
-50 to 127 -20 0.32 mm
Exp. 5 (lit) Paper feed from optional third
paper feeder
-50 to 127 -20 0.32 mm
Exp. 1 (flashing) Duplex mode -50 to 127 0 0.32 mm
Original Copy
example 1
Copy
example 2