2HA/2HB
1-3-34
U144
Setting toner loading operation
Description
Sets toner loading operation.
Purpose
To run when drum filming (background blur in paper edge section) occurs.
Method
Press the start key.
Setting
1. Select either "on" or "oFF" using the zoom +/- keys.
Initial setting: oFF
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U157
Checking/clearing the developing drive time
Description
Displays the developing drive time for checking, clearing or changing a figure.
Purpose
To check the developing drive time after replacing the developer unit.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Clearing
1. Light exp. 3.
2. Press the start key. The drive time is cleared, and the indication for selecting a maintenance item No.
appears.
Setting
1. Change the drive time using the numeric or zoom +/- keys.
2. Press the start key. The drive time is set, and the indication for selecting a maintenance item No.
appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
Display Description
on Toner loaded
oFF Toner not loaded
Exposure indicator Description Setting range Initial setting
Exp. 1 First 3 digits 000 to 999 000
Exp. 2 Last 3 digits 000 to 999 000
Exp. 3 Clearing the drive time - -
To Next Page
Loading...
