Optional Equipment
9-2 ADVANCED OPERATION GUIDE
Document Processor
The document processor automatically
feeds and scans multiple sheet originals
one by one.
IMPORTANT: Be sure that the document processor is closed whenever transporting
the machine.
Acceptable Originals
• Use sheet originals only
• Paper weight: 50 to 120 g/m²
• Paper sizes: 8 1/2 × 14 inches Legal and Folio (Maximum), 5 1/2 × 8 1/2
inches Statement and A5R (Minimum)
• Maximum number which can be set at one time: 50 sheets (50 to 80 g/m²)
Originals to Avoid
Be sure not to use the following originals in the document processor.
• Originals with punched holes or perforations.
• Transparencies.
• Soft originals such as carbon or vinyl paper, or other originals that are curled,
wrinkled or creased.
• Irregularly shaped originals, wet originals, or originals that have adhesive tape
or glue on them.
• Originals with clips or staples. Remove the clips or staples, and straighten any
curls, wrinkles or creases, before placing them in the document processor.
Failure to do so may result in the originals being jammed.
• Originals with cut-out sections or that have a slippery surface on either side.
• Originals on which any correction fluid is still wet.
• Folded originals - smooth out the folds before setting them in the document
processor. Failure to do so may result in the originals being jammed.
To Next Page
Loading...
Need help?
Power
Paper Handling
Output Speeds
Memory
Weight and Dimensions
