Scanning Functions
ADVANCED OPERATION GUIDE 2-9
Using the Document Processor
Continuous Scanning
Use Continuous Scan to scan originals into memory in individual sections. The
machine groups the sections to form a single job.
1
Press Send. The basic screen is displayed.
2
Press Function.
3
Press S or T to select Continuous Scan and press Enter. The Continuous Scan
screen is displayed.
4
Press S or T to select On and press Enter. The display shows Completed and
returns to the Function screen.
5
Press right Select. The display returns to the basic screen.
Using Continuous Scanning
1
Place the first original on the platen.
2
Press Send. The basic screen is displayed.
3
Enter the destination of the intended recipient from the one-touch keys, Address
Book or W.
To register one-touch keys refer to Registering One-Touch Keys on page 5-6. To use
the address book refer to Using the Address Book on page 2-4.
4
Program the features as required.
5
Press Start. The first original is scanned.
6
Once the scanning operation is completed, Set original and press Start key is
displayed. Place the next original on the platen and press Start. The next original is
scanned.
7
Repeat step 6 until all originals have been scanned.
Top Edge to Rear Top Edge to Left
Rear
Left
To Next Page
Loading...
