System Settings
ADVANCED OPERATION GUIDE 5-17
Registering Custom Paper Size
If you normally copy or print onto a paper size that is not registered in this machine
(non-standard size), it is convenient to register that size in advance. It is possible to
register a custom paper size within the following ranges:
1 Access Custom PaperSize.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2 Press S or T to select Custom and press Enter. The Size Entry(Y) screen is
displayed.
3 Use the numeric keys to enter the Y dimension (height) of the print paper to be
registered.
Once the height is displayed, press Enter. The Size Entry(X) screen is
displayed.
4 Use the numeric keys to enter the X dimension (width) of the print paper to be
registered.
Once the width is displayed, press Enter. The display shows Registered and
returns to the Orig./Paper Set screen.
Measurement X Range Y Range
Inch specifications 3.15 to 8.50 inches 5.83 to 14.02 inches
Metric specifications 80 to 216 mm 148 to 356 mm
System Menu/
Counter
S or T
Common Setting
Enter
S or T
Orig./Paper Set
Enter
S or T
Custom PaperSize
Enter
To Next Page
Loading...
