Management
7-6 ADVANCED OPERATION GUIDE
1
Log in as a user with administrator rights.
2
Press the System Menu key.
3
Press [User Login/Job Accounting].
4
If user login is disabled, the user authentication screen appears. Enter your
login user name and password and then press [Login]. For this, you need
to log in with administrator privileges. The default login user name and
password are both
“3060”.
5
Press [Next] of User Login Setting, [Register/Edit] of Local User List, and
then [Add].
6
Press [Change] of
User Name.
7
Enter the user name and press [OK].
NOTE: Refer to the Operation Guide for details on entering characters.
8
Enter the login user name and E-mail address following 6 and 7 above.
9
Press [Change] of Login Password and then [Password].
10
Enter the login password and press [OK].
11
Press [Confirm Password].
12
Enter the same login password to confirm and press [OK].
13
Press [Change] of Access Level.
User:**
User Name:
Account Name:Access Level:
Register
Status
10/10/2007 10:10
E-mail Address:
Login PasswordLogin User Name:
Cancel
User0099
Account02User
abcd@efg.com
********0099
Change
Change
DetailChange
Change
Detail
To Next Page
Loading...
