Preparation for Usage
2-28
10
Select Print using LPR and click the Next button.
The following steps may vary slightly if KPrint has been
installed before.
11
Input the IP address or host name for this device in IP
address or Host name and go to Step 14. If you don’t
know the IP address or host name for this device, click
Search and go to the next step.
12
A list of printers available on the network is displayed.
Select this device and click the OK button.
13
The IP address or host name selected in Step 12 is displayed in IP address or Host name.
14
Confirm the print server port and click the Next button.
15
Input the Destination printer port name and click the
Next button.
To Next Page
Loading...
