What to do if my Kyocera KM-4035 says 'Close xxx cover x'?
If your Kyocera All in One Printer displays the message 'Close xxx cover x', it means that the indicated cover is open. Ensure the cover is securely closed.
What to do if my Kyocera KM-4035 says 'Add toner to resume copying'?
If your Kyocera All in One Printer displays the message 'Add toner to resume copying', it means there is not enough toner to continue printing. You should replace the toner container immediately.
What to do if my Kyocera Copier says 'Add toner to resume copying'?
If your Kyocera Copier displays 'Add toner to resume copying', it means the toner is low. Replace the toner container immediately to continue.
Why does my Kyocera All in One Printer say 'Exceeds pre registered copying quantity'?
The message 'Exceeds pre registered copying quantity' on your Kyocera All in One Printer indicates that the copy limit set in the copy management mode has been reached, preventing further copies. Clear the copy count from the management mode to resolve this.
What does it mean if my Kyocera KM-4035 All in One Printer says 'Paper drawer is out of order'?
If your Kyocera All in One Printer displays 'Paper drawer is out of order' or 'Paper cassette is out of order', it indicates that the drawer or cassette currently in use is malfunctioning and cannot be used. Contact your service representative immediately. You can continue copying using another drawer or cassette.
How to resolve 'Reposition original' message on Kyocera KM-4035?
The message 'Reposition original' on your Kyocera All in One Printer means that the orientation of the original document and the selected paper are different. Change the orientation of the original to match the paper. Alternatively, pressing the Start key will initiate same-size copying.
What to do if Kyocera KM-4035 All in One Printer says 'Set drawer' or 'Close paper cassette'?
If your Kyocera All in One Printer displays 'Set drawer' or 'Close paper cassette', it means one of the drawers or cassettes is not closed properly. Pull it out and push it back in all the way to ensure it is correctly set.
How to fix 'System error. Disconnect power plug from the socket' on Kyocera All in One Printer?
If your Kyocera All in One Printer shows 'System error. Disconnect power plug from the socket', a system error has occurred. Disconnect the power plug from the outlet and then reconnect it.
Why does my Kyocera KM-4035 say 'Check paper size'?
The 'Check paper size' message on your Kyocera All in One Printer indicates that the loaded paper is not suitable for the selected mode. Check the paper to ensure it meets the requirements.
What to do if Kyocera KM-4035 All in One Printer shows 'System error. Main switch off/on'?
If your Kyocera All in One Printer displays the message 'System error. Main switch off/on', a system error has occurred. Turn the main power switch OFF and then ON to resolve the issue.
General| Print Resolution | 600 x 600 dpi |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Automatic Duplexing | Yes |
| Fax Capability | Yes |
| Functions | Copier, Printer, Scanner |
| Gray Scale Half-Tones | 256 |
| Supported Media Type | Plain, Recycled, Transparency |
| Standard Media Size | A4, A5, B5 |
| Scanner Type | Flatbed |
To Next Page
