Kyocera KM-4230

1-10
1. Printer Driver for Windows 95/98
In the Properties window, click the Paper tab.
The Paper tab page will appear.
Select [Custom] from [Paper Size:], then click the [Custom Size…] button.
The [Custom Paper Size] dialog box will appear.
1
2
Select the desired unit in [Units].
Specify the desired paper width and length in [Size].
3
4
When the paper size has been set, click [OK].
To cancel the setting, click [Cancel].
The [Paper] tab page will reappear.
5
■ Setting the Desired Paper Size
This section explains how to set the desired paper size.
The paper size can be set in the [Custom Paper Size] dialog box.
To reset the paper size to the default size, click [Restore Defaults] button. All the settings made here will be reset to their default values.
AA
AA
A: [Units]
Select the unit. Either inch or mm can be selected.
BB
BB
B: [Size]
Specify the desired paper size.
[Width:] ...................................... The paper width can be set between 3.86 and 11.69 inch (98.0 and 269.9 mm).
Click the arrow buttons (▲,▼) or enter the desired width directly from the keyboard.
[Length:] .................................... The paper length can be set between 5.83 and 17.00 inch (148.1 and 431.8 mm).
Click the arrow buttons (▲,▼) or enter the desired length directly from the keyboard.
AA
AA
A
BB
BB
B