What to do if Kyocera TASKALFA 300I says the phone receiver is off the hook?
If your Kyocera All in One Printer displays this message, it means the phone connected to the machine is off the hook. Simply hang up the handset.
What to do if Kyocera TASKALFA 300I says to add paper?
If your Kyocera All in One Printer displays this message, it means the indicated cassette or MP tray is out of paper. Add paper of the same size as indicated. If a specific type of printing paper is specified, the necessary paper types will also be displayed. To use a different paper source, select the desired paper source and press [Continue]. You can also press [MP Tray Setting] to change the paper size/type of the MP tray. Also, make sure that the cassette is securely loaded; remove it and reload it completely.
Why Kyocera TASKALFA 300I has no print output after reception?
If there is no print output after reception on your Kyocera All in One Printer, check if memory forwarding is activated and verify the forwarding destination.
Why Kyocera All in One Printer cannot receive document?
If your Kyocera All in One Printer cannot receive a document, first check that the modular cord is correctly connected. If a communication error is displayed, address the cause of the error and ask the sender to retry. Additionally, check if RX (reception) restriction is activated and, if it is, cancel the RX restriction.
Why Kyocera All in One Printer cannot send document?
If your Kyocera All in One Printer cannot send a document, make sure the modular cord is correctly connected. If a send error is displayed, identify the cause of the error and try sending again. Also, verify whether TX (transmission) restriction is activated and, if so, cancel the TX restriction.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 600 x 600 DPI |
| Time to first page (black, normal) | 5.8 s |
| Print speed (black, normal quality, A4/US Letter) | - ppm |
| Copier resize | 25 - 400 % |
| Maximum number of copies | 999 copies |
| Time to first copy (color, normal) | 5.1 s |
| Scan to | E-mail, FTP, USB |
| Grayscale levels | 256 |
| Scan speed (black) | 50 ppm |
| Scan speed (color) | 15 ppm |
| Faxing | Mono faxing |
| Fax memory | 12 MB |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax transmission speed | 3 sec/page |
| Digital sender | No |
| Maximum duty cycle | - pages per month |
| Page description languages | Microsoft XPS, PCL 6, PostScript 3 |
| Paper input type | Cassette, Paper tray |
| Total input capacity | 1200 sheets |
| Total output capacity | 250 sheets |
| Maximum input capacity | 2200 sheets |
| Multi-Purpose tray input capacity | 200 sheets |
| Maximum print size | 297 x 420 mm |
| Duplex media weight | 60 - 80 g/m² |
| Paper tray media types | Plain paper |
| Paper tray media weight | 60 - 120 g/m² |
| ISO A-series sizes (A0...A9) | A3 |
| Multi-Purpose Tray media weight | 45 - 200 g/m² |
| Display | LCD |
| Control type | Touch |
| Product color | Black |
| Market positioning | Business |
| Standard interfaces | Ethernet, USB 2.0 |
| Mobile printing technologies | Not supported |
| Internal memory | 2048 MB |
| Processor family | PowerPC |
| Internal storage capacity | 160 GB |
| Sound pressure level (copying) | 66.5 dB |
| Sound pressure level (quiet mode) | 47 dB |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 130 W |
| Power consumption (PowerSave) | 12 W |
| Power consumption (average operating) | 610 W |
| Mac operating systems supported | Mac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Sustainability certificates | ENERGY STAR |
| Certification | GS, TÜV, CE |
Weight and Dimensions| Depth | 630 mm |
|---|---|
| Width | 570 mm |
| Height | 767.2 mm |
To Next Page
