What to do if Job Accounting restriction exceeded on Kyocera TASKalfa 305?
If the number of paper used has exceeded the limit preset by Job Accounting, no further operation is possible. Press [End] to cancel the job. Try performing the job again after resetting the limit for paper use.
Why I cannot send a fax from my Kyocera TASKalfa 305?
There might be several reasons why you cannot send a fax. First, ensure the modular cord is correctly connected. Second, check the Permitted FAX No. and Permitted ID No. Also, review the error codes in the TX/RX Result Report and Activity Report; if the error code starts with "U" or "E", follow the corresponding procedure. You can also try sending the fax again. If the issue persists, contact your Service Representative.
What to do if my Kyocera All in One Printer cannot send a document?
If your printer can't send a document, first ensure the modular cord is correctly connected. If the issue persists, identify and fix the cause of the error, and then try sending the document again. Alternatively, you might need to cancel the TX restriction.
How to fix Kyocera All in One Printer when it cannot receive a document?
If your printer isn't receiving documents, start by ensuring the modular cord is correctly connected. If that's not the issue, identify and fix any underlying errors, then ask the sender to resend the document. You may also need to cancel the RX restriction.
What to do if my Kyocera TASKalfa 305 All in One Printer reports a machine failure?
If you receive a machine failure message, try turning the main power switch off and on, or unplug the power cord and plug it in again. If the message continues to appear, note the error code, then turn off the main power switch, unplug the power cord, and call your service representative.
What to do if Kyocera TASKalfa 305 says the phone receiver is off the hook?
If you receive a message stating the phone receiver is off the hook, and you have a commercially available phone connected to the machine, ensure the handset is hung up properly.
What to do if Kyocera TASKalfa 305 displays 'Box limit exceeded'?
If you see a 'Box limit exceeded' message, it could be due to the Sub Address Box capacity being full. Press [End] to cancel the job, then try again after printing or deleting data in the Sub Address Box. Alternatively, the polling box might be full. Press [End] to cancel the job, then delete documents from the polling box and repeat the operation.
What to do if Scheduled sending jobs exceeded on Kyocera TASKalfa 305 All in One Printer?
If the number of jobs has exceeded the limit set for delayed transmission, press [End] to cancel the job. Wait until the delayed transmission is executed, or cancel the delayed transmission and then perform the job again.
Why can't my Kyocera All in One Printer perform broadcast transmission?
Broadcast transmission cannot be performed if the memory does not have free space. Send after the memory has free space, or create free space in the memory.
What to do if Kyocera TASKalfa 305 All in One Printer cannot perform encrypted communication?
If your printer is unable to perform encrypted communication, double-check the registrations both at the sender and recipient ends.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print technology | Laser |
| Print Speed (Black) | 30 ppm |
| Print Speed (Color) | 30 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 100, 000 pages |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Duplex Printing | Yes |
| Standard Paper Capacity | 500 sheets |
| Standard Memory | 1 GB |
| Maximum Memory | 2 GB |
| Operating System Compatibility | Windows, Mac, Linux |
| Type | All-in-One Printer |
| Copy Speed | 30 cpm |
| Scanner Type | Flatbed, ADF |
| Scan Speed (Color) | 30 images per minute |
| Supported Paper Sizes | A4, A5, B5, Letter, Legal |
| Connectivity | USB 2.0, Ethernet |
| Network Connectivity | 10/100/1000 Base-TX |
To Next Page
