Kyocera TASKalfa 305 - Document Processer; Detaching and Refitting the Document Processer

2K3/2L3
1-5-28
1-5-10 Document processer
(1) Detaching and refitting the document processer
Procedure
1. Remove the restriction parts.
2. Open the document processer on verti-
cally.
Figure 1-5-47
3. Remove two screws and then remove
the DP interface connector.
4. Pull the document processer upwards
out.
Figure 1-5-48
DP
Restriction parts
DP
DP interface
connector
Screws