2K3/2L3-1
1-2-13
1. Enter 000 using the numeric keys and press the start key.
2. Select Maintenance and press the start key to output a list of the current settings of the maintenance
items.
3. Press the stop key.
1. The machine is reactivated by tswitching the main switch off and on.
1. Select [Report Print] to print a user setting list.
1. Place an original and make test copies.
1. Attach the corresponding language label as required.
(2) Setting initial copy modes
Factory settings are as follows:
Maintenance
item No.
Contents Factory setting
U253 Switching between double and single counts
Double count
(A3/Ledger)
U260 Selecting the timing for copy counting Eject
U285 Setting service status page On
U326 Setting the black line cleaning indication On/8
U343 Switching between duplex/simplex copy mode Off
Output an own-status report (maintenance item U000)
Print out a user setting list
Attaching the language label (Excluding 240V AC)
Installation is completed.
To Next Page
Loading...
