Kyocera TASKalfa 305 - Detaching and Refitting the Operation Panel PWB Main

2K3/2L3
1-5-35
(4) Detaching and refitting the operation panel PWB main
Procedure
1. Remove the language sheets.
(See page 1-5-37)
2. Remove two screws.
Figure 1-5-61
3. Remove three connectors from the
operation panel PWB main.
4. Remove the operation panel upper unit.
Figure 1-5-62
Screw
Screw
Connector
Connector
Connector
Operation panel PWB
Operation panel
upper unit