2K3/2L3
1-4-2
Code Contents Conditions
Jam
location*
0000 Initial jam The power is turned on when a sensor in the con-
veying system is on.
-
0100 Secondary paper feed
request time out
Secondary paper feed request given by the con-
troller is unreachable.
F
0101 Waiting for process package
to be ready
Process package won’t be ready. F
0104 Waiting for conveying pack-
age to be ready
Conveying package won’t be ready. F
0106 Paper feeding request for
duplex printing time out
Paper feeding request for duplex printing given by
the controller is unreachable.
F
0107 Waiting for fuser package to
be ready
Fuser package won’t be ready. -
0110 Right cover open The right cover is opened during printing. -
0111 Front cover open The front cover is opened during printing. -
0120 Receiving a duplex paper
feeding request while paper
is empty
Paper feed request was received from the duplex
section despite the absence of paper in the duplex
section.
G
0121 Exceeding number of duplex
pages circulated
The controller issued the duplex section a request
for more pages than the duplex print cycle con-
tains.
G
0210 Right lower cover open The right lower cover is opened during printing. -
0501 No paper feed from cassette
1
The registration sensor (RS) does not turn on dur-
ing paper feed from cassette 1.
A
0502 No paper feed from cassette
2
PF feed sensor 1 (PFFS1) does not turn on during
paper feed from cassette 2 (Retry 1 times).
B
0503 No paper feed from cassette
3
PF feed sensor 2 (PFFS2) does not turn on during
paper feed from cassette 3 (Retry 1 times).
C
0508 No paper feed from duplex
section
The registration sensor (RS) does not turn on dur-
ing paper feed from duplex section.
G
0509 No paper feed from MP tray The registration sensor (RS) does not turn on dur-
ing paper feed from MP tray.
D
0511 Multiple sheets in cassette 1 The registration sensor (RS) does not turn off dur-
ing paper feed from cassette 1.
A
0512 Multiple sheets in cassette 2 PF feed sensor 1 (PFFS1) does not turn off during
paper feed from cassette 2.
B
0513 Multiple sheets in cassette 3 PF feed sensor 2 (PFFS2) does not turn off during
paper feed from cassette 3.
C
0518 Multiple sheets in duplex
section
The registration sensor (RS) does not turn off dur-
ing paper feed from duplex section.
G
0519 Multiple sheets in MP tray The registration sensor (RS) does not turn off dur-
ing paper feed from MP tray.
D
*:
Refer
to figure 1-4-1 for paper jam location (see page 1-4-1).
To Next Page
Loading...
