Kyocera TASKalfa 305 - Page 128

2K3/2L3
1-4-4
4311 Duplex sensor stay jam The duplex sensor (DUS) does not turn off during
paper feed from cassette 1.
G
4312 The duplex sensor (DUS) does not turn off during
paper feed from cassette 2.
G
4313 The duplex sensor (DUS) does not turn off during
paper feed from cassette 3.
G
4319 The duplex sensor (DUS) does not turn off during
paper feed from MP tray.
G
4901 Bridge conveying sensor 1
non arrival jam
The bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 1.
F
4902 The bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 2.
F
4903 The bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from cassette 3.
F
4908 The bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from duplex section.
F
4909 The bridge conveying sensor 1 (BRCS1) does not
turn on during paper feed from MP tray.
F
4911 Bridge conveying sensor 1
stay jam
The bridge conveying sensor 1 (BRCS1) does not
turn off during paper feed from cassette 1.
J
4912 The bridge conveying sensor 1 (BRCS1) does not
turn off during paper feed from cassette 2.
J
4913 The bridge conveying sensor 1 (BRCS1) does not
turn off during paper feed from cassette 3.
J
4918 The bridge conveying sensor 1 (BRCS1) does not
turn off during paper feed from duplex section.
J
4919 The bridge conveying sensor 1 (BRCS1) does not
turn off during paper feed from MP tray.
J
5001 Bridge conveying sensor 3
non arrival jam
The bridge conveying sensor 3 (BRCS3) does not
turn on during paper feed from cassette 1.
J
5002 The bridge conveying sensor 3 (BRCS3) does not
turn on during paper feed from cassette 2.
J
5003 The bridge conveying sensor 3 (BRCS3) does not
turn on during paper feed from cassette 3.
J
5008 The bridge conveying sensor 3 (BRCS3) does not
turn on during paper feed from duplex section.
J
5009 The bridge conveying sensor 3 (BRCS3) does not
turn on during paper feed from MP tray.
J
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).