Kyocera TASKalfa 305 - Page 274

2K3/2L3
2-4-10
Automatic continue for ‘Press
GO’
Y0 0: Off
1: On
0
Automatic continue timer Y1 Number from 0 to 99 in increments of 5 sec-
onds
6
(30 secons)
Error message for device error Y3 0: Not detect
1: Detect
0
Duplex operation for specified
paper type
(Prepunched, Preprintedand Let-
terhead)
Y4 0: Off
1: On
0
Default operation for PDF direct
printing
Y5 0: Enlarges or reduces the image to fit in the
current paper size. Loads paper from the
current paper cassette.
1: Through the image. Loads paper which is
the same size as the image.
2: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size
paper depending on the image size.
3: Through the image. Loads Letter, A4 size
paper depending on the image size.
8: Through the image. Loads paper from the
current paper cassette.
9: Through the image. Loads Letter, A4 size
paper depending on the image size.
10: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size
paper depending on the imagesize.
0
e-MPS error Y6
0:Does not print the error report and display
the error message.
1:Prints the error report.
2:Displays the error message.
3:Prints the error report and displays the error
message.
3
a. Characters higher than 127 are printed regardless of the C8 value. However, setting C8 to 0 does not
print character code 160.
Item FRPO Setting values
Factory
setting