2LK/2LN/2LM/2LC
1-3-182
U468 Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U469 Adjusting the color registration
Description
Performs the color registration correction and transfer belt speed correction.
Purpose
To perform when replacing the maintenance kit or laser scanner unit.
Method
1. Press the start key.
2. Select the item.
Method: [Auto]
1. Select [Print].
2. Press the start key. A chart for adjustment is outputted.
3. Set the output chart for adjustment as the original.
4. Select [Execute].
5. Press the start key. Color registration correction starts.
6. When normally completed, [OK] is displayed.
If a problem occurs during auto adjustment, error code is displayed.
Figure 1-3-33
Item No. Description
Display Description
Auto Executing the auto color registration correction
Manual Executing the manual color registration correction
Belt Initialize Executing the transfer belt speed correction
Chart for adjustment
To Next Page
Loading...
