2LK/2LN/2LM/2LC
1-5-26
10. Remove two screws and then remove
the middle feed plate.
11. Remove two LSU retainer pins and two
springs.
Figure 1-5-43
12. Pull the LSU out a little.
13. Remove the following connector from
the LSU.
30 ppm model/35 ppm model:
FFC connector with a lock: 1pcs
Connector: 2pcs
45 ppm model/55 ppm model:
FFC connector with a lock: 2pcs
Connector: 2pcs
*: When remove the FFC from the FFC
connector with a lock, removing it after
release the lock by lifting the lock lever
up.
Figure 1-5-44
Middle feed plate
LSU retainer pin
Screw
Screw
Spring
LSU
FFC
FFC
FFC connector
*
with a lock
*
:45ppm/55ppm only
Connectors
FFC connector
with a lock
To Next Page
Loading...
