Kyocera TASKalfa 3050ci - 1,000-sheet Finisher (Option)

2LK/2LN/2LM/2LC
2-3-4
YC7
1 KMDET I 0/3.3 V DC KMAS set signal
Connected to
KMAS
2 NC - - Not used
3 KMDREQ I 0/3.3 V DC KMAS control signal
4 KMACK O 0/3.3 V DC KMAS control signal
5 KMRXD O 0/3.3 V DC (pulse) KMAS received data signal
6SGND -- Ground
7 KMTXD I 0/3.3 V DC (pulse) KMAS transmission data signal
8SGND -- Ground
9SGND -- Ground
10 SGND - - Ground
11 +5V O 5 V DC 5 V DC power to KMAS
12 +5V O 5 V DC 5 V DC power to KMAS
YC8
1 RESET0 I 0/3.3 V DC Reset signal
Connected to
interface
PWB
2 WAKEUP0 O 0/3.3 V DC Control signal
3 AUDIO0 I Analog Audio signal
4 GND - - Ground
5 USB_DP0 I/O - USB data signal
6 USB_DN0 I/O - USB data signal
7 VBUS0 O 3.3 V DC 3.3 V DC power to IFPWB
8 GND - - Ground
9 RESET1 I 0/3.3 V DC Reset signal
10 WAKEUP1 O 0/3.3 V DC Control signal
11 AUDIO1 I Analog Audio signal
12 GND - - Ground
13 USB_DP1 I/O - USB data signal
14 USB_DN1 I/O - USB data signal
15 VBUS1 O 3.3 V DC 3.3 V DC power to IFPWB
YC9
1 GND - - Ground
Connected to
interface
PWB
2 5V_CUT0 I 0/3.3 V DC 5 V DC cut signal
3 GND - - Ground
4 5V O 5 V DC 5 V DC power to IFPWB
5 GND - - Ground
6 5V_CUT1 I 0/3.3 V DC 5 V DC cut signal
Connector Pin Signal I/O Voltage Description