8-11
Setup and Registration (System Menu) > System Menu
Original Settings
[
System Menu/Counter
] key > [
Common Settings
] > [
Original Settings
]
Configure settings for originals.
Item Description
Custom Original Size
Set up frequently-used custom original size.
The custom size option is displayed on the screen to select original size.
Value
Metric
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
Inch
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
X=Length, Y=Width
Auto Detect Original Size (DP)
Select whether to automatically detect originals of the document processor.
Auto Detect
Select whether to enable automatic detection of original size.
Value: off, on
System of Units
Select inch or metric for the unit of original size detection.
Value: Metric, Inch
When [
Auto Detect
] is set to [
Off
], this function will not be displayed.
Legal/OficioII/
216 x 340 mm
As Legal, OficioII and 216 x 340 mm are similar in size, select either one of them for automatic
detection.
Value: Legal, OficioII, 216 x 340 mm
When [
Auto Detect
] is set to [
Off
], this function will not be displayed.
When [
System of Units
] is set to [
Metric
], this function will not be displayed.
To Next Page
Loading...
