When contacting us, the serial number will be necessary. To check the serial number, refer to the following:
Display for Device Information (page 2-16)
Loading Paper in the Multi Purpose Tray (page 5-5)
Message Checkpoints Corrective Actions
Reference
Page
A
Acceptable staple count
exceeded.
Is the acceptable staple count
exceeded?
Select [
Continue
] to print without
stapling. Select [
Cancel
] to cancel the
job.
—
Activation error.
― Turn the power switch off and on. If the
error exists, contact administrator.
page 2-9
Add the following paper in
cassette #.
Is the indicated cassette out of paper? Load paper.
Select [
Paper Selection
] to select the
other paper source. Select [
Continue
]
to print on the paper in the currently
selected paper source.
page 3-2
Add the following paper in
the multi purpose tray.
Does the selected paper size matches
the paper size loaded in the specified
paper source?
Select [
Continue
] to continue printing.
Select [
Cancel
] to cancel the job.
—
Is the indicated cassette out of paper? Load paper.
Select [
Paper Selection
] to select the
other paper source. Select [
Continue
]
to print on the paper in the currently
selected paper source.
page 3-9
Adjusting…
― The machine is under the adjustment to
maintain its quality. Please wait.
—
B
Box is not found.
― The specified box cannot be found. Job
is canceled. Select [
End
].
—
Box limit exceeded.
*1
Is [
End
] displayed on the screen? The specified box is full, and no further
storage is available; Job is canceled.
Select [
End
]. Try to perform the job
again after printing or deleting data from
the box.
—
C
Calibrating…
— The machine is under the adjustment to
maintain its quality. Please wait.
page 10-37
To Next Page
Loading...
