Kyocera TASKalfa 306ci - Calibration; Laser Scanner Cleaning

10-37
Troubleshooting > Adjustment/Maintenance
Calibration
Using this function enables printing in the most appropriate color by adjusting hue and color drift in detail.
1
Display the screen.
[ System Menu/Counter ] key > [ Adjustment/Maintenance ] > [ Calibration ]
2
Perform the calibration.
Select [ Start ]. "Calibration" begins.
Laser Scanner Cleaning
Remove vertical lines from the printout.
1
Display the screen.
[ System Menu/Counter ] key > [ Adjustment/Maintenance ] > [ Laser Scanner Cleaning ]
2
Perform the laser scanner cleaning.
Select [ Start ]. "Laser Scanner Cleaning" begins.
NOTE
When the hue and color drift are not enhanced even after performing calibration, refer to the following:
Color Registration Procedure (page 10-30)