9-29
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
PIN Login Settings
This sets whether or not to login using PIN.
1
Display the screen.
1
[
System Menu/Counter
]
key > [
User Login/Job Accounting
]
2
Selet [
PIN Login
].
2
Configure the settings
1
Select [
Off
] or [
On
].
2
Select [
OK
].
This setting is only displayed when
[
Network Authentication
]
must be selected for the authentication method and the
server type is set to [
Ext.
] in "Network Authentication".
Optional Applications (page 11-6)
If the user authentication screen appears, enter your login user name and login
password and select [
Login
]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 3000
Login Password: 3000
To Next Page
Loading...
