Kyocera TASKalfa 306ci - Local Authorization

9-16
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Local Authorization
Select whether or not to use Local Authorization.
1
Display the screen.
1 [ System Menu/Counter ] key > [ User Login/Job Accounting ]
2 [ User Login Setting ] > [ Local User Authorization ]
2
Select [Off] or [On].
NOTE
When using Local Authorization, the user authentication type must be set to [ Local Authentication ].
Enabling User Login Administration (page 9-3)
NOTE
If the user authentication screen appears, enter your login user name and login
password and select [
Login ]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 3000
Login Password: 3000