Kyocera TASKalfa 306ci - Quick Setup Wizard

2-28
Installing and Setting up the Machine > Quick Setup Wizard
Quick Setup Wizard
For FAX functions, paper settings, Energy Saver functions and network settings, the following settings can be configured
in a wizard-style screen.
1
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard]
FAX Setup
*1
*1 FAX functions are available only on products with the fax function installed.
Configures basic fax settings.
1. Dialing/RX Mode Dialing Mode
*2
Reception Mode
Auto (DRD)
*3
*2 Inch version only.
*3 DRD reception mode is available for some countries.
2. Local FAX Info. Local FAX Name
Local FAX Number
Local FAX ID
TTI
3. Sound Speaker Volume
Monitor Volume
Job Finish Buzzer
4. Rings Normal
*4
Answering Machine
*4
FAX/TEL Switch
*4
*4 This setting does not appear in some regions.
5. Output Paper Output
*5
*5 Displayed only when the optional Job Separator and mailbox are installed.
6. Redial Retry Times
Energy Saver Setup Configures sleep mode and low power mode.
1. Sleep Mode Sleep Timer
Sleep Level (models except for Europe)
2. Low Power Mode Low Power Timer
Network Setup Configures network settings.
1. Network Obtain IP Address
IP Address
*6
Subnet Mask
*6
Default Gateway
*6
*6 Not displayed when "Obtain IP Address" is set to [Auto (DHCP)].
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login with administrator privileges. The factory default login user name and login password are set as
shown below.
Login User Name: 3000
Login Password: 3000