8-20
Setup and Registration (System Menu) > System Menu
Measurement
[
System Menu/Counter
] key > [
Common Settings
] > [
Measurement
]
Low Toner Alert Level
[
System Menu/Counter
] key > [
Common Settings
] > [
Low Toner Alert Level
]
Keyboard Layout
[
System Menu/Counter
] key > [
Common Settings
] > [
Keyboard Layout
]
USB Keyboard Type
[
System Menu/Counter
] key > [
Common Settings
] > [
USB Keyboard Type
]
Offset Documents by Job
[
System Menu/Counter
] key > [
Common Settings
] > [
Offset Documents by Job
]
Item Description
Measurement
Select inch or metric for the unit for paper dimensions.
Value: mm, inch
Item Description
Low Toner Alert
Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
This notification is used for event report, Status Monitor, SNMP Trap.
Value: Off, On
If [
On
] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in
1% increments).
Item Description
Keyboard Layout
Change the layout of the touch panel keyboard used to enter characters.
Value: QWERTY, QWERTZ, AZERTY
Item Description
USB Keyboard Type
Select the type of USB keyboard that you want to use.
Value: US-English, US-English with Euro, French, German
Item Description
Offset Documents by Job
Select whether to offset documents by Job.
Value: Off, On
To Next Page
Loading...
